產品中心
華美玻璃棉板的板材排列要求
發布時間:2024-05-23 來源:http://www.jshwdao.com/
1、根據標準全寬(規格:1200x600),路面沿水平方向自下而上錯開1/2板長。從墻角開始,將固定板垂直交錯連接,確保墻角平直垂直。陰陽角的玻璃棉板交錯聯鎖。門窗洞口轉角處不得拼接玻璃棉,應用整塊玻璃棉板切割形成垂直于板面的切口,墻面轉角處用同一塊保溫板粘貼固定。
1. According to the standard full width (specification: 1200x600), the road surface is horizontally staggered by 1/2 of the board length from bottom to top. Starting from the corner of the wall, connect the fixing plates vertically and staggered to ensure that the corner is straight and vertical. The glass wool boards at the inner and outer corners are interlocked in a staggered manner. Glass wool should not be spliced at the corners of door and window openings. A whole piece of glass wool board should be cut to form a cut perpendicular to the board surface. The same insulation board should be used to fix the corners of the wall.
2、使用玻璃棉板前,設計好鋪設方法。計算尺寸并切割材料。刃口的直線誤差應小于5毫米,拼縫不應大于2毫米。板與板之間的間隙應使用專用膠帶粘合。
2. Design the laying method before using the glass wool board. Calculate dimensions and cut materials. The straight-line error of the cutting edge should be less than 5 millimeters, and the seam should not exceed 2 millimeters. The gap between boards should be glued with special tape.
3、玻璃棉板應自上而下連接,玻璃棉板應按順序鋪設。滿足門窗洞口時,應符合相關要求。
3. Glass wool boards should be connected from top to bottom and laid in sequence. When meeting the requirements for door and window openings, relevant requirements should be met.
以上是關于 華美玻璃棉板 的介紹,若想了解相關知識可請點擊:http://www.jshwdao.com 我們將會(huì )全心全意為您提供滿分服務,歡迎您的來電!
The above is an introduction to Huamei Glass Cotton Board. If you want to learn more about related knowledge, please click: http://www.jshwdao.com We will wholeheartedly provide you with full score service. Welcome to call us!